If you set this bigger than SIM supports, new messages will not be received! Maximum number of messages that will be saved. Which modem channel to use for receiving. Sender number that will be allowed to run commands, must specify country code ie. Since v3.24 RouterOS also supports receiving of SMS messages, and can execute scripts, and even respond to the sender.īefore router can receive SMS, relevant configuration is required in general /tool sms menu. If there is no logging entry add it by running this command: PDU (Protocol Data Unit) message and its decrypted version is printed under LTE debug logging.įlags: X - disabled, I - invalid, * - default USSD messages can be sent by using type="ussd" when sending an SMS message and in the phone-number field specify the USSD command "phone-number="*245#"" (/tool sms send type=ussd lte1 phone-number="*120#).įor 3rd party modems, USSD messages can be processed by using AT commands (commands can differ or even may be blocked on some modems).ģG or GSM network modes must be activated to use this functionality, as it's not supported under LTE only mode ( R11e-LTE modem auto switches to 3G mode to send out USSD message). USSD (Unstructured Supplementary Service Data) messages can be used to communicate with mobile network provider to receive additional information, enabling additional services or adding funds to prepaid cards. The SMS tool has channel support since v3.28 Some modems may have just two channels, some have more. Note: Since V3.23 there is one port per modem, and modem has channels used for commands and data. It is displayed immediately and not stored in phone. If set to class-0, then send class 0 SMS message. It is encoded using GSM 7 encoding (UCS2 currently is not supported), so message length is limited to 160 characters (characters ^\~ If first character is "+" then phone number type is set to international, otherwise it is set to unknown. Name of port from /port list that GSM modem is attached to. tool sms send lte1 "20000000" command takes following parameters: tool sms send usb3 "20000000" lte interface use lte interface name in port field: 'advanced-tools' package provides command '/tool sms send' that uses standard GSM AT commands to send SMS. GSM standard defines AT commands for sending SMS messages, and defines how messages should be encoded in these commands. RouterOS lists such modem as serial port that appears in '/port print' listing. It is possible to connect GSM modem to RouterOS device and use it to send and receive SMS messages.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |